Transfer pumps

Feed material directly from original containers

Depending on the application type, it may be useful to be able to supply material directly from the original containers using a transfer pump. DOPAG transfer pumps are double-acting pumps with a fast-switching air motor. It should be noted that the use of transfer pumps is always dependent on the material properties and the container type.

Features

  • Low viscosity material feeding via a bung hole
  • Flow rate up to 1.0/6.0 litres/minute at 20 double strokes
  • Pressure ratio up to 21:1/36:1
  • Max. viscosity 80'000 mPas
  • Sealing available in various sizes and material finish

Compare several products and request them online!

Visit our product portal now

Technical specifications

Basis version TP20
505.05.30
TP60
505.05.31
TP200
505.05.32
TP200
505.05.82
FP300
Pressure ratio
(drive)
21:1 21:1 21:1 7.6:1 11:1/23:1/37:1
Flow rate
(at 20 double strokes)
l/min
0.80 0.80 0.80 2.24 6.00
Material viscosity
mPa s
50.000 50.000 50.000 50.000 50.000
Working pressure (max.)
bar
100 (160) 100 (160) 100 (160) 50 (80) 250
Air consumption
(at 20 double strokes)
l/min
142 142 142 142 450 / 900 / 1400
Height retracted
mm
917 1150 1438 1438 1040
Pump length
mm
339 577 860 860 600
Weight without container
kg
13.2 14.9 14.9 14.9 38 / 42 / 46
Maximum container height
mm
339 577 860 860 -
Maximum container size
l
20 60 200 200 -