The Micro-Flow Sensor is a flow detecting device, used within a semi or fully automated metering process, to detect whether material has been dispensed.The Micro-Flow Sensor does not control the metering volume.
It is used particularly when handling unfilled grease with NLGI class 1 to 3, high viscosity oils or silicone-oils. The Micro-Flow Sensor can be adapted to the DOPAG Micro and Mini metering valves as well as to the 419 range of metering valves.
Features and benefits
- Continuous detection of material flow
- High process reliability
- Simple refitting to existing metering systems
- Compact sensor design
- Dependable electronics
- Simple operation
- No mechanical adjustment required
- Stainless steel wetted parts
- Adaptable to all DOPAG needle nozzles
The Micro-Flow Sensor detects whether material hasbeen dispensed or not, without contact with the material. An induced analogue measurement signal is amplified andforwarded to the electronic controller. The sensor is ableto capture up to 120 metering cycles per minute. Should the electronic controller fail to send a signal asa result of no material flow, the master control unit willactivate an alarm.
|Detecting volume||5 to 25 mm³ per cycle with Micro metering valve 5 to 1.000 mm³ per cycle with Mini metering valve and the 419 range of metering valves|
|Cycle time||up to 120 metering cycle per minute|
|Material outlet||Connector for DOPAG needle nozzle M 12 x 1|
|Electronic control supply voltage||18 to 36 V DC|
|Electronic control signal output||24 V DC, 500 mA max.|
|Dimensions, L x B x H||MICRO-FLOW Sensor without needle nozzle, 80 x 63 x 19 mm Electronic control, 115 x 100 x 19 mm|